Installation Guide

 The appliance is heavy, move it carefully.
 To facilitate ignition, light the burners before placing pans on the grid.
Check that the ame is regular.
 Always lower the ame or turn it o before removing the pan.
 Ensure burner caps are installed correctly (See instruction as below.)
Control knobs on the gas burners
The knobs for the gas burners of the cooker are found on the control
panel. The regulating knobs should be turned in anti-clockwise direction
until the small ame symbol, vice- versafor the larger ame symbol.
Ignition of the hob gas burners To light up the burner, keep pushing the
knob and turn it anti-clockwise to maximum, and hold it for 3 to 5
seconds. The ignition will spark and ignite the burner. At this position the
gas supply is at the maximum and the ame also at its maximum.
You can reduce the ame size by turning the knob in anti-clockwise
direction to achieve your requirements. Should the burner fail to light up,
turn the knob to its original position and try again. Your burner ame
should be blue in colour.
NOTE -When rst used, the gas burner will not ignite immediately.
Time is required for the LPG to fully ll the operating system.
USE GUIDE