Installation Guide
INSTALL GUIDE
STEP 3: MINIMUM FLAME ADJUSTMENT WARNING!
These adjustments should be made only for use of the appliance
with natural gas. For use with liquid propane gas, the choke screw
must be fully turned in a clockwise direction.
SURFACE BURNERS
1. Light one burner at a time and set the knob to the MINIMUM
position (small flame).
2. Remove the knob.
3. The range is equipped with a safety valve. Using a small-size
slotted screwdriver, locate the choke valve on the valve body and
turn the choke screw to the right or left until the burner flame is
adjusted to desired minimum.
4. Make sure that the flame does not go out when switching quickly
from the MAXIMUM to the MINIMUM position.