Installation Guide

INSTALL GUIDE
The ranges must be used only with the legs properly installed.
Four height-adjustable legs are shipped with the range in the
polystyrene container situated over the appliance.Before installing
the legs, position the appliance near its final location as the legs
are not suitable for moving the appliance over long distances.
After unpacking the range, raise it enough to insert the legs in the
appropriate receptacles situated on the lower part of the appliance.
Lower the range gently to keep any undue strain from legs and
mounting hardware. If possible use a pallet or lift jack instead of
tilting the unit.Adjust leg height to the desired level by twisting the
inside portion of the leg assembly until the proper height is
reached. Check with a level that the cooktop is perfectly level.
INSTALLING THE LEGS