Instructions / Assembly

INSTALLATION GUIDE AND USER MANUAL
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
TOOLS & PARTS
REQUIRED FOR
INSTALLATION
LOCATION REQUIREMENTS
CONTENT OF
THE BOX
Electrical drill or ratchet driver
1/2” drill bit for drilling pilot holes
1 1/4” drill bit for drilling electrical wiring access hole
Screwdriver: Phillips & Straight blade
Pliers
Tape Measure or ruler + pencil
Electrical supplies for wiring
Aluminium foil tape and/or HVAC tape
Hammer
Jigsaw or saber saw
Stud nder
Observe all governing codes and local ordinances. Have a qualied technician install the range hood. It is the installer´s
responsibility to comply with installation clearences specied on the model serial rating plate.
Canopy hood´s location should be away from strong draft areas, such as windows, doors, and strong heating vents.
Recommended heights are shown. Given dimensions provide minimum cleareance.
Body (Main Unit): 1 pc
Installation Manual: 1 pc
Metal Grease Filter: 1-4 pcs
Hardware: 1 set