Specification

Preparing and loading dishes
Adding A Dish
To add or remove items after wash cycle starts:
1 Open door slightly and wait a few seconds until wash
action
stops before completely opening.
2 Add the item.
3 Close door firmly to latch and cycle will automatically
resume.
CAUTION
TO AVOID BURN INJURY: Slightly open door and
wait
until spray arms and wash action stop. Hot
water
may splash out of dishwasher. Failure to do
so
may result in injury.
Filling the rinse aid dispenser
Rinse aid greatly improves drying and reduces water
spots
and filming.Without rinse aid your dishes and
dishwasher
interior will have excessive moisture. The
Heated Dry option will not perform as well without rinse
aid.The
rinse aid dispenser,located next to the
Detergent cup,automatically releases a measured
amount
of rinse aid during the last rinse.
If spotting and poor drying is a problem,increase the
amount
of rinse aid dispensed by rotating the dial to a
higher number.The dial is located under the dispenser
cap.
If the rinse aid is low, the Rinse Aid light is illuminated at
the beginning and end of the cycle indicating that it
is time to refill.
12
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE
WWW.KUCHT.COM