Datasheet

3www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 05/2017
Linear measuring technology
Linear measuring technology
Measuring length up to 10 m
integrated inclinometerDraw wire encoder D125
Draw wire mechanics
with redundant sensors
Terminal assignment
Sensor type Type of connection M12 connector, 5-pin
A22, A44, R22, R44
(analog sensor)
1
Signal: +V n.c. 0 V Uout 1 Uout 2
Pin: 1 2 3 4 5
Sensor type Type of connection M12 connector, 5-pin
RC1
(CANopen)
1
Signal: 0 V +V CAN-GND CAN-H CAN-L
Pin: 3 2 1 4 5
Technology in detail
Inclinometer with option RC1
Setting possibility 360°
Redundant signals possible.
Setting possibilities:
· Switching between setting possibilities 180° and 360°.
· Switching between synchronous and asynchronous output.
· Change of direction of rotation (cw/ccw).
· Setting and resetting an offset.
Setting possibility ±180°
+V : Power supply +V DC
0 V : Power supply GND (0V)
Uout 1 : Voltage output 1
Uout 2 : Voltage output 2
Top view of mating side, male contact base
M12 connector, 5-pin
53 1
2
4
angle: 0° ... 360° angle: ±180°