Datasheet
536
0,24
12,5
0,79
0,49
1,22
20
31
44 1,73
0,4712
16,5
6,2
37 1,46
0,24
0,2
0,65
5
6,2
37 1,46
48 1,897 0,28
62 2,44
www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 11/2017
Linear measuring technology
Electrical characteristics (digital output)
The electrical characteristics of the draw wire mechanics with digital output
can be found in the data sheets of the encoders.
Measuring length max. 3 m
Traverse speed max. 10 m/sDraw wire encoder B80
Draw wire mechanics
with encoder or analog sensor
Technical data: 8.0000.7000.0045
- mounting bracket (anodized alum.)
- guide pulley (plastic POM)
- ball bearing (type 696-2R5)
Scope of delivery:
- 2 x countersunk screws
for lateral fixing
- 2 x hexagonal screws
for fixing on a flat surface
Operating principle
Construction
The core of a draw wire device is a
drum mounted on bearings, onto which
a wire is wound. Winding takes place
via a spring-loaded device.
Note
Exceeding the maximum extension
length of the draw wire will lead to
damage to the wire and the
mechanics.
Drum width
Wire diameter
Drum diameter
Electrical characteristics (analog sensor, scaled to measuring range)
Version A22 A11 A33
Analog output 0 ... 10 V 4 ... 20 mA potentiometer
Output 0 ... 10 V / galv. isolated, 4 conductors 4 ... 20 mA / 2 conductors 1 kΩ
Power supply 12 ... 30 V DC 12 ... 30 V DC max. 30 V DC
Recommended slider current – – < 1 µA
Max. current consumption 22.5 mA (no load) 50 mA –
Reverse polarity protection yes yes –
Working temperature -20°C ... +85°C [-40°F ... +185°] -20°C ... +85°C [-40°F ... +185°] -20°C ... +85°C [-40°F ... +185°]
-40°C ... +85°C [-40°F ... +185°F]
2)
-40°C ... +85°C [-40°F ... +185°F]
2)
-40°C ... +85°C [-40°F ... +185°F]
2)
-20°C ... +120°C [-4°F ... +248°F]
2)
Connection diagrams
CE compliant acc. to EMC guideline 2014/30/EU
RoHS guideline 2011/65/EU
+
-
V+
V
V+
out
0 V
+
-
V+
V+
out
GND
out
0 V
+
-
V+
V
A
V+
out
+
-
V+
V
V+
out
0 V
+
-
V+
V+
out
GND
out
0 V
+
-
V+
V
A
V+
out
+
-
V+
V
V+
out
0 V
+
-
V+
V+
out
GND
out
0 V
+
-
V+
V
A
V+
out
1) On request for encoder version: 00, F3, 63, F8, 68 (see order code
c
).
2) Optional on request.
Mechanical characteristics (draw wire mechanics)
Measuring range 1000 mm 2000 mm 3000 mm
Extension force F
min
6.9 N 6.4 N 6.9 N
F
max
8.3 N 7.8 N 9.8 N
Max. speed 10 m/s 10 m/s 10 m/s
Max. acceleration 140 m/s
2
140 m/s
2
140 m/s
2
Linearity (of the measuring range)
with analog sensor ±0.15 % ±0.1 % ±0.1 %
with encoder ±0.05 % ±0.05 % ±0.05 %
±0.02 %
1)
±0.02 %
1)
±0.02 %
1)
Weight
approx. 750 g [26.45 oz]
(dep. on the sensor/encoder used)
Material housing titanium-anodized aluminum
wire stainless steel ø 0.5 mm
ø 1 mm can be supplied as a special up to
measuring range 1500 mm
(other wire types on request)
Protection acc. to EN 60529
IP65 (sensor)
Technical data
Connection technology for analog sensor Order no.
Cordset, pre-assembled
M12 female connector with coupling nut, 5-pin
2 m [6.56‘] PVC cable
05.00.6081.2211.002M
Connector, self-assembly (straight)
M12 female connector with coupling nut, 5-pin
8.0000.5116.0000
Accessories for draw wire encoder Dimensions in mm [inch] Order no.
Guide pulley