Datasheet

ManualsBrandsKübler ManualsAngle & Rotary SensorsDraw Wire Encoder, Potentiometer 1m Resistive

1/2006

250

www.kuebler.com

IInnttrroodduuccttiioonn

Measuring length and position is one of the

routine tasks in the manufacture of machi-

nery and plant. Draw wire encoders offer

proven cost-effective solutions in such

applications. Linear motion is converted to

rotary motion using a wire that is drawn out

or in from the draw wire mechanism. This

rotation is converted into corresponding

electrical signals by an encoder or poten-

tiometer connected to the mechanism.

The electrical signals can then be proces-

sed by remote displays, counters or control-

lers. The Kübler also provides an extensive

range of displays, counters and controllers..

• Compact

• Measuring length up to 2000 mm

• Robust construction

MMeecchhaanniiccaall cchhaarraacctteerriissttiiccss ooff tthhee ddrraaww--wwiirree eennccooddeerrss::

Measuring range: up to 2000 mm

Absolute accuracy: ±0.1 % for the whole measuring range

Repetition accuracy ±0.15 mm per direction of travel

Resolution (incremental): 0.1 mm (standard encoder) with 1000 ppr.

Traversing speed: max. 800 mm/s

Required force: approx. 10 N (on wire)

Material: Housing: reinforced plastic

Wire: stainless steel ø 0.45 mm,

plastic coated

Weight: approx. 0.210 kg

DDeessccrriippttiioonn ooff tthhee iinnccrreemmeennttaall eennccooddeerr

((ccoonnnneecctteedd oonn llooaadd ssiiddee))

• Compensation for temperature and

ageing

• Short-circuit protected outputs

• Reverse polarity protected power-supply

input

• Push-pull output

MMeecchhaanniiccaall cchhaarraacctteerriissttiiccss::

EEl

leeccttrriiccaall cchhaarraacctteerriissttiiccss::

Protection acc. to EN 60529: IP 64 from housing side

Working temperature: –20° C ... +85 °C

Operating temperature: –20° C ... +90 °C

Shock resistance acc. to DIN-IEC 68-2-27: 1000 m/s

, 6 ms

Vibration resistance acc. to DIN-IEC 68-2-27: 100 m/s

, 55 ... 2000 Hz

Output circuits: Push-pull Push-pull

Supply voltage: 5 ... 24 V DC 8 ... 30 V DC

Current consumption (without load): max. 50 mA max. 50 mA

Permitted load per channel: max. 50 mA max. 50 mA

Pulse rate: max. 160 kHz max. 160 kHz

Switching level high: min. U

– 2.5 V min. U

– 3 V

Switching level low: max. 0.5 V max. 2.5 V

Rise time t

: max. 1 µs max. 1 µs

Fall time t

: max. 1 µs max. 1 µs

Short-circuit protected outputs: yes yes

Conforms to CE requirements acc. to EN 61000-6-1, EN 61000-6-4 and EN 61000-6-3

MMiinnii ddrraaww wwiirree eennccooddeerr,, iinnccrreemmeennttaall

Linear Measuring Technology

Draw wire

Summary of content (4 pages)

PAGE 1
Linear Measuring Technology Draw wire Mini draw wire encoder, incremental Introduction Measuring length and position is one of the routine tasks in the manufacture of machinery and plant. Draw wire encoders offer proven cost-effective solutions in such applications. Linear motion is converted to rotary motion using a wire that is drawn out or in from the draw wire mechanism. This rotation is converted into corresponding electrical signals by an encoder or potentiometer connected to the mechanism.
PAGE 2
Linear Measuring Technology Draw wire Mini draw wire encoder incremental Dimension 8 25.8 40 31 4.5 44 min. 5 M6 M4, max. Einschraubtiefe 8 mm M4, max. screw-in depth 8 mm 58 6 40 55 Signal: Cable colour: 0V WH +UB BN A GN A YE Signal: Cable colour: B GY B PK 0 BU O RD Linear Measuring Technology Magnetic, Draw wire, Kits Terminal assignment of the encoder: Isolate unused outputs before start-up.
PAGE 3
Linear Measuring Technology Draw wire Mini draw wire encoder, analogue output • • • • Compact Measuring length up to 2000 mm Robust construction Simple processing of analogue signal by means of a digital panel meter • Low-cost alternative to encoder version • Voltage or current output Mechanical characteristics of the draw-wire encoder: Measuring range: Absolute accuracy: Repetition accuracy: Resolution: up to 2000 mm ±0.35 % for the whole measuring range ±0.
PAGE 4
Linear Measuring Technology Draw wire Mini draw wire encoder, analogue output Dimensions: length = 1 m 8 Dimensions: length = 2 m 25.8 4.5 44 min. 5 M6 40 44 M6 6 40 31 40 ~26 max. 5 M4, max. Einschraubtiefe 8 mm M4, max. screw-in depth 8 mm Wire outlet Kabelabgang 22xx4 M4, mm max. Screw in depth 8 8mm Einschraubtiefe mm 6 26 40 8 72 55 Linear Measuring Technology Magnetic, Draw wire, Kits 31 Electrical connections (4 ...