Data Sheet

125125www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 10/2016
Preset counters
Display 2 line 2 x 6 digits LCD display
upper line 9 mm [0.35“],
lower line 7 mm [0.28“],
special sign 2 mm high [0.079“]
standard positive green with
optional backlighting
2-color upper line:
negative, red backlighting
lower line:
negative, green backlighting
Operating temperature -10°C ... +50°C [+14°F ... +122°F]
(non-condensing)
Storage temperature -25°C ... +75°C [-13°F ... +167°F]
Humidity at +40°C [+104°F] RH 93 % (non-condensing)
Altitude up to 2000 m [6562‘]
Protection IP65 (front side)
Weight AC version approx. 250 g [8.82 oz]
DC version approx. 150 g [5.29 oz]
Sensor power supply AC 115/230 V, ±10 %, 50/60 Hz,
max. 6.5 VA
DC 11 ... 30 V , max. 4 W
External fuse protection 230 V AC T 0.1 A
115 V AC T 0.125 A
11 ... 30 V DC T 0.2 A
Data retention > 10 years, EEPROM
Input modes pulse counter cnt.dir, up.dn, quad
timer FrErun, InpA.InpB., InpB.InpB.
Sensor power supply AC supply 24 V DC -40/+15 %,
50 mA at 230 V AC,
40 mA at 115 V AC
DC supply max. 50 mA
external power supply is
connected through
EMC standards EN 55011 class B,
EN 61000-6-2, EN 61000-6-3,
EN 61326-1
Device safety designed to EN61010 part 1
protection class 2
application area pollution level 2
General technical data
Mechanical characteristics
Electrical characteristics
8-pin connector
7-pin connector
Suitable gaskets, other accessories and installation examples for optional accessories can be found in chapter Accessories or in the Accessories section under: www.kuebler.com/accessories.
Accessories Dimensions in mm [inch] Order no.
1 ... 8, pitch
3.81 N100498
9 ... 15 (for 923 / 924), pitch 5.08 N100548u002
Replacement parts Order no.
Sealing cover type K2, IP65
suitable for front bezel 75 x 60 [2.95 x 2.36]
with screw mounting transparent/black G008303
Transparent cover, IP65
for cut-out 50 x 50 [1.97 x 1.97], with screw mounting for counters with lockable G008143
cut-out 45 x 45 [1.77 x 1.77] and front bezel 48 x 48 [1.89 x 1.89] key lockable G008153
Adapter front bezel, 72 x 72 [2.83 x 2.83]
for cut-out 68 x 68 [2.68 x 2.68] to cut-out 45 x 45 [1.77 x 1.77]
(Mating clip T009420 must be ordered separately) black T008177
mating clip T009420
Adapter front bezel, 55 x 55 [2.17 x 2.17]
for cut-out 50 x 50 [1.97 x 1.97] to cut-out 45 x 45 [1.77 x 1.77]
with clip mounting for counters 48 x 48 [1.89 x 1.89] black T008853
Gasket 58 x 58 [2.28 x 2.28] , for cut-out 50.2 x 50.2 [1.98 x 1.98] N511004
Adapter front bezel, 60 x 75 [2.36 x 2.95]
for cut-out 50 x 50 [1.97 x 1.97] to cut-out 45 x 45 [1.77 x 1.77]
with screw mounting for counters 48 x 48 [1.89 x 1.89] black T008860
Gasket 60 x 75 [2.36 x 2.95] for cut-out 50 x 50 [1.97 x 1.97] N511020
Mounting frame
with cut-out 50 x 50 [2.36 x 2.36]
via separate adapter also for 45 x 45 [1.77 x 1.77]
for snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 48 x 48 [1.89 x 1.89], 53 x 53 [2.09 x 2.09]
and 55 x 55 [2.17 x 2.17]
chromated G300003
Preset counters, electronic
LCD preset counters Codix 907 / 9081 or 2 presets – pulse, time – 5 kHz (AC+DC)
Technical data