Datasheet

124124 www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 03/2013
Display 2 line 2 x 6 digits
   LCDdisplay(upperline
9 mm, lower line 7 mm,
special sign 2 mm high)
- positive green with
optional backlighting
   -2-colourupperline:
negative, red backlighting
    lowerline: 
negative, green backlighting
Operating temperature -10°C ... +50°C
(non-condensing)
Storage temperature -25°C ... +75°C
Humidity at+40°C RH93%(non-condensing)
Altitude up to 2000 m
Protection IP65 (front side)
Weight AC version approx. 250 g
DC version approx. 150 g
Sensor power supply AC 115/230V,±10%,50/60Hz,
max. 6.5 VA
DC 11 ... 30 V , max. 4 W
External fuse protection 230 V AC T 0.1 A
115 V AC T 0.125 A
11 ... 30 V DC T 0.2 A
Data retention   >10years,EEPROM
Input modes pulse counter cnt.dir, up.dn, quad
timer
FrErun, InpA.InpB., InpB.InpB.
Sensor power supply  ACsupply 24VDC-40/+15%, 
50 mA at 230 V AC,
40 mA at 115 V AC
DC supply
max. 50 mA
external power supply is
connected through
EMC  Emittedinterference EN55011classB 
  Immunitytointerference EN61000-6-2
Device safety  Designedto EN61010part1 
Protection class 2
Application area Pollution level 2
General technical data
Mechanical Data
Electrical characteristics
8-pin connector
7-pin connector
Suitablegasketsaswellasfurtheraccessoriescanbefoundintheaccessoriessectionorintheaccessoriesareaofourwebsiteat:www.kuebler.com/accessories.
Accessories Order-No.
1 ... 8, pitch 3.81
N100498
9 ... 15 (for 923 / 924), pitch 5.08 N100548u002
Replacement parts
Sealing cover type K2, IP65
Suitable for front bezel 75 x 60 mm for screw mounting transparent/black G008303
Transparent cover, IP65
For cut-out 50 x 50 mm, with screw mounting for counters lockable G008143
with cut-out 45 x 45 mm and front bezel 48 x 48 mm key lockable G008153
Adapter front bezel, 72 x 72 mm
For cut-out 68 x 68 mm to cut-out 45 x 45 mm
(Mating clip T009420 must be ordered separately) black
T008177
mating clip T009420
Adapter front bezel, 55 x 55 mm
For cut-out 50 x 50 mm to cut-out 45 x 45 mm
with clip mounting for counters 48 x 48 mm black
T008853
Gasket 58 x 58 mm, for cut-out 50.2 x 50.2 mm N511004
Adapter front bezel, 60 x 75 mm
For cut-out 50 x 50 mm to cut-out 45 x 45 mm
with screw mounting for counters 48 x 48 mm black
T008860
Gasket 60 x 75 mm for cut-out 50 x 50 mm N511020
Mounting frame with cut-out 50 x 50 mm
(via supplied adapter also for 45 x 45 mm)
Forsnap-onmountingon35mmtop-hatDINrail,
for counters 48 x 48 mm, 53 x 53 mm and 55 x 55 mm chromated
G300003
Preset counters, electronic
LCD preset counters Codix 907 / 9081 or 2 presets – pulse, time – 5 kHz (AC+DC)