Data Sheet

126126
91 [3.583]
4,25 [0.167]
max. 10,5 [0.413]
7 [0.276]
45 [1.77]
48 [1.89]
48 [1.89]
15,5 [0.61]
91
4,25
max. 10,5
7
45
48
48
15,5
45
+0,6
[1.772
+0.024
]
45
+0,6
[1.772
+0.024
]
www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 10/2016
Count inputs A and B
Polarity of the inputs programmable for all inputs
in common, NPN/PNP
Input resistance 10 kΩ
Count frequency max. 5 kHz
(details see manual) can be
damped to 30 Hz
(mechanical contacts)
Control / Reset input Lock, Reset
Min pulse duration of
signal and control inputs statical /1 ms
Switching levels
4 ... 30 V DC: low 0 ... 2 V DC
with AC/DC supply high 3.5 ... 30 V DC
Pulse shape variable,
Schmitt-Trigger
characteristics
Switching voltage max. 250 V AC / 110 V DC
Switching current max. 3 A AC/DC
min. 30 mA DC
Switching capacity max. 750 VA / 90 W
Output 1
Mech. service life (switching cycles) 2 x 10
7
N° of switching cycles at 3 A / 250 V AC 1 x 10
5
N° of switching cycles at 3 A / 30 V DC 1 x 10
5
Relay with closing contact, progr. normal closed or normal open.
Output 2
Mech. service life (switching cycles) 20 x 10
6
N° of switching cycles at 3 A / 250 V AC 5 x 10
4
N° of switching cycles at 3 A/30 V DC 5 x 10
4
Relay with changeover contact
Reaction time of the outputs pulse counter < 15 ms
timer < 10 ms
Inputs Outputs
Terminal assignment
Output 1
Output 2
Power supply
Panel
cut-out
Pin Signal and control inputs
1 Sennsor power supply
2 GND (0 V DC)
3 INP A (Signal input A)
4 INP B (Signal input B)
5 RESET (Reset input)
6 LOCK (Key locking input)
7 n. c.
8 n. c.
Pin Version with relays
9 Relay contact C.
10 Relay contact N.O.
11 Relay contact C.
12 Relay contact N.O.
13 Relay contact N.C.
14 AC: 115/230 V AC N~
DC: 11 ... 30 V DC
15 AC: 115/230 V AC L~
DC: GND (0 V DC)
Preset counters, electronic
LCD preset counters Codix 907 / 9081 or 2 presets – pulse, time – 5 kHz (AC+DC)
Dimensions
Dimensions in mm [inch]