Datasheet

3/2005
Display counter
www.kuebler.com 83
Display counter
LLCCDD DDiissppllaayy ccoouunntteerr CCOODDIIXX 113300//113311//113322//113333
• Low-price and high efficiency
• Large 8-digit LCD display, height of the
figures 8 mm
• Optional backlighting
• Various counting modes like up /down,
differential and phase discriminator
counting, also with pulse doubling for
connection with incremental encoders
• High voltage input for 10 ... 260 V AC/DC
voltage pulses
• Unified Codix design, suiting the exten-
sive Codix family
• IP65
• Screw terminals, RM 5 mm
• Lifetime of the battery
approximately 8 years
• Locking of the reset key
• Operating temperature –10 ... +60 °C
• All versions for positive or negative
counting edge
• Filter function for bounce-free counting
with mechanical contacts.
TTeecchhnniiccaall ddaattaa::
Power supply: non-replaceable lithium battery
(lifetime approximately 8 years at 20°C)
Backlighting: external electrical source
24 V DC +/-20 %, 50 mA
Display: LCD, 8 digits, height of the figures 8 mm
Mode: adding or subtracting (selectable)
counting direction
differential counting or
phase discriminator single or
dual evaluation, selectable
Display range: –9999999 ... 99999999, with overflow display
Reset: manual and electrical
UL certified File: E128604
Interference emissions: EN 55011 Class B, EN 61000-6-2
EN 61010 Section 1 (only AC versions)
Housing : dark grey RAL 7021
Operating temperature: –10 ... +55 °C
Ambient temperature: –10 ... +60 °C
Storage temperature: –20 ... +70 °C
Protection: IP 65 front
Weight: approximately 50 g
Counting inputs:
Counting input of the DC-versions (max. 30 V DC)
Slow counting input: max. 30 Hz NPN
Fast counting input: max. 12 kHz (PNP), 7 kHz (NPN)
Switching level: NPN: Low: 0 ... 0,7 V, High: 3 ... 30 V DC
PNP: Low: 0 ... 0,7 V, High: 4 ... 30 V DC
Counting input of the high voltage versions (10 ... 260 V DC/V AC)
Counting input: Optocoupler input, max. 30 Hz
Min. pulse time: 16 ms
Switching level: Low: 0 ... 2 V DC/V AC, High: 10 ... 260 V DC/V AC
Counting direction switching (only DC-version)
Mode : see order table
Contact input: Open Collector NPN (switching at 0 V DC)
Switching level: NPN: Low: 0 ... 0,7 V, High: 3 ... 5 V DC
Reset Input (only DC and high voltage)
Minimum pulse time: DC: 50 ms, high voltage: 16 ms
Contact input DC*: NPN: Low: 0 ... 0,7 V, High: 3 ... 30 V DC
High voltage input: 10 ... 260 V DC/V AC
Electrical reset key locking (for DC and AC)
Contact input: Open Collector NPN (switching at 0 V)
Switching level: NPN: Low: 0 ... 0,7 V, High: 3 ... 5 V DC
* and high voltage 131 and 132
Display counter electronic