Datasheet

49www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 03/2013
Pulse counters
Pulse counters, electronic
Display LCD, 8 digits, 8 mm high
Backlighting external electrical source
24 V DC ±20 %, 50 mA
Modes adding or subtracting
(selectable)
Display range -9999999 ... 99999999,
with overflow display
Reset manual and electrical
Working temperature -10°C ... +55°C
(non-condensing)
Operating temperature -10°C ... +60°C
(non-condensing)
Storage temperature -20°C ... +70°C
Altitude up to 2000 m
Housing dark grey RAL 7021
Protection IP65 (front side)
Weight approx. 50 g
Power supply internal lithium battery
approx. 8 years at 20°C
EMC Emitted interference EN 55011 class B
Immunity to interference EN 61000-6-2
Device safety Designed to EN 61010 part 1
Protection class 2
Application area Pollution level 2
UL approval File-No.: E128604
Counting input of the DC-versions (max. 30 V DC)
slow counting input max. 30 Hz NPN
fast counting input max. 12 kHz (PNP),
7 kHz (NPN)
switching level NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 30 V DC
switching level PNP LOW 0 ... 0.7 V DC
HIGH 4 ... 30 V DC
Counting input of the high voltage versions (10 ... 260 V DC/V AC)
optocoupler input, max. 30 Hz
min. pulse time 16 ms
switching level LOW 0 ... 2 V AC/DC
HIGH 10 ... 260 V AC/DC
Counting direction switching (only DC-version)
mode see order table
contact input Open Collector NPN
(switching at 0 V)
switching level NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 5 V DC
Reset input (only DC and high voltage)
minimum pulse time DC 50 ms
high voltage 16 ms
contact input DC – NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 30 V DC
high voltage input 10 ... 260 V AC/DC
Electrical reset key locking (for DC and high voltage)
contact input Open Collector NPN
(switching at 0 V)
switching level NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 5 V DC
General technical data
Mechanical characteristics
Counting inputs
Electrical characteristics
Transparent cover, lockable, IP65
Sealing cover type K1, IP65
For cut-out 54 x 29 mm, for screw mounting to front bezel F1B or
adapter front bezel N003001, for counters with cut-out 50 x 25 mm or 45 x 22.2 mm N003002
Suitable for front bezel 60 x 50 mm for screw mounting of electromechanical
counters and via adapter front bezel N003001, for counters 48 x 24 mm
G008301
Suitable gaskets as well as further accessories can be found in the accessories section or in the accessories area of our website at: www.kuebler.com/accessories.
Adapter front bezel, 72 x 36 mm
Adapter front bezel, 48 x 48 mm
Adapter front bezel, 60 x 50 mm
For cut-out 68 x 33 mm to cut-out 45 x 22.2 mm,
for counters 48 x 24 mm, as set black and silver anodised
162704 Set
For cut-out 45 x 45 mm to cut-out 45 x 22.2 mm,
with clip mounting for counters 48 x 24 mm black
T008883
For cut-out 54 x 29 mm to cut-out 45 x 22.2 mm,
with screw mounting and gasket for counters 48 x 24 mm black
N003001
Mounting frame with cut-out 50 x 25 mm
via separate adapter also for 45 x 22.2 mm
For snap-on mounting on 35 mm top-hat DIN rail, for counters 53 x 28 mm
and via separate adapter (T008180) for counters 48 x 24 mm chromated
G300004
Accessories Order-No.
Codix 130Adding or subtracting (battery)LCD pulse counters