Data Sheet

266
- 20° + 55°
RoHS
AC
115/230V
DIN 48 x 48
000000
IP65
12345
12345
push
2 x 6
000000
000000
kWh
www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 04/2017
Dual function counters HW 66 / HW 66 MEnergy and time (AC)
Energy meters
Type Voltage Order no.
HW 66 230 V AC 3.563.201.075
1)
HW 66 115 V AC 3.563.201.074
1)
MID version:
HW 66 M 230 V AC 3.56M.201.075
1)
Product features
• Metering of hours run and energy consumption in one compact
device – panel mounting.
• Wide temperature range.
• Remote readout via SO outputs on request.
• Shows both values in parallel.
• Easy-to-read display – can also be read if no voltage present.
Benefits
• Tamper-proof fixed installation with high degree of protection.
• High measuring accuracy.
• Can be officially calibrated (MID).
Applications
Dehumidifiers, hire equipment and machinery, air-conditioning,
production equipment, current generators.
The HW 66 and HW 66 M combination meters consist of an hour
meter and an energy meter.
These panel-mounted devices require only a limited installation
depth and can be used in a wide variety of application areas.
The count pulses can be read out via the SO output.
Additional model:
MID version for applications requiring official calibration.
Power supply Timer DIN front bezel Energy meterDisplay
2 x 6 digit
High protection
level
No reset
Order specifications
Delivery includes
· Counter
· Gasket
· Mounting clip
MID version
Temperature
range
1) Standard stock model
Adapter front bezel, 55 x 55 [2.17 x 2.17]
Adapter front bezel, 60 x 75 [2.36 x 2.95]
Adapter front bezel, 72 x 72 [2.83 x 2.83]
for cut-out 50 x 50 [1.97 x 1.97] to ø 50.5 [1.99] ,
with clip mounting for counters 48 x 48 [1.89 x 1.89] black T008171
for cut-out 50 x 50 [1.97 x 1.97] to cut-out 45 x 45 [1.77 x 1.77]
with screw mounting for counters 48 x 48 [1.89 x 1.89] black T008860
for cut-out 68 x 68 [2.68 x 2.68] to cut-out 45 x 45 [1.77 x 1.77]
Mating clip T009420 must be ordered separately black T008177
Accessories Dimensions in mm [inch] Order no.
Suitable gaskets as well as further accessories can be found in theaccessories section or in the accessories area of our website at: www.kuebler.com/accessories.
Mounting frame
with cut-out 50 x 50 [2.36 x 2.36]
via separate adapter also for 45 x 45 [1.77 x 1.77]
for snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 48 x 48 [1.89 x 1.89], 53 x 53 [2.09 x 2.09]
and 55 x 55 [2.17 x 2.17] chromated G300003
Adapter front bezel, ø 72 [2.83]
for cut-out ø 60 [2.36] to cut-out 45 x 45 [1.77 x 1.77]
with clip mounting for counters 48 x 48 [1.89 x 1.89] black N510226
Adapter front bezel, 55 x 55 [2.17 x 2.17]
for cut-out 50 x 50 [1.97 x 1.97] to cut-out 45 x 45 [1.77 x 1.77]
with clip mounting for counters 48 x 48 [1.89 x 1.89] black T008853
Gasket 58 x 58 [2.28 x 2.28] , for cut-out 50.2 x 50.2 [1.98 x 1.98] N511004
MID
approved