Datasheet

179

RoHS

www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 03/2013

Hour meters /

Timers

Hour meters / timers, electromechanical

Fig. Mounting options Display Protection El. connection Housing Height of ﬁg. Type

1) Panel mount with latch front side IP65, front side ﬂying leads plastic 4 mm

HK 07.20

2) PCB mount, lying on the top IP65, front side/on rear solder pins plastic 4 mm HK 07.90

4) PCB mount, upright front side IP65, front side/on rear solder pins plastic 4 mm HK 07.92

5) Base mount, upright front side IP40 ﬂying leads plastic 4 mm AHK 07.00

Type series

The micro timers of the HK 07 and AHK 07 families offer a

particularly large number of variants and can be used in many

different applications thanks to their wide voltage range from

4.5 to 35 V DC.

Available as panel, base and PCB mount versions, they can

be used in many different ﬁelds of application. Thanks to their

encapsulated housing, these non-resettable counters are

extremely tamper-proof.

Characteristics

• 7-digit micro hour meter

• High shock and impact resistance

• Low power consumption; suitable for battery operation

• Small dimensions – magnied large gures

• Panel-mount counter with integrated spring clip

• PCB-mount counter

• Machine-solderable and wash-proof

• Protection IP65

Beneﬁts

• Wide voltage range 4.5 ... 35 V DC

• Count retention in case of power failure

• Long service life

Applications

General time measurement, maintenance intervals for measuring

instruments (respiration units, oxygen, dialysis), small appliances,

UV lamps, display panels in vehicles

1) Panel mount / display front side 3) PCB mount, upright / display front side 2) PCB mount, lying / display on the top

Optional: PCB mount, hanging / display front side

Mounting options and position of the display

4) Base mount, upright / display front side

Micro timers HK 07 / AHK 07Many different installation options (DC)

PAGE 1
Hour meters / timers, electromechanical Micro timers Many different installation options (DC) HK 07 / AHK 07 The micro timers of the HK 07 and AHK 07 families offer a particularly large number of variants and can be used in many different applications thanks to their wide voltage range from 4.5 to 35 V DC. Available as panel, base and PCB mount versions, they can be used in many different fields of application.
PAGE 2
Hour meters / timers, electromechanical Micro timers Many different installation options (DC) HK 07 / AHK 07 Technical data flying leads, AWG 22 (red +, black -) approx. 150 mm, 6 mm stripped wire ends, tinned solder pins 0.4 x 1.2 mm, tinned Height of figures 1.2 x 4.0 mm Colour of figures white and red on black Reset no reset Power consumption (every 36 s with a pulse length of 32 ms) at UB = 5 V DC typ. 82 mW at UB = 12 V DC typ. 135 mW at UB = 24 V DC typ.
PAGE 3
Hour meters / timers, electromechanical 13.8 [0.543] Micro timers 2 Many different installation options (DC) HK 07 / AHK 07 Punching28.8 diagram for 3.1 PCB [1.134] (component side) [0.122] 36.3 [1.429] PCB mount, upright / display front side Type HK 07.92 Ø1.6 [0.063] 13.8 [0.543] 13.8 [0.543] 28.8 [1.134] 1 2 28.8 [1.134] 3.1 [0.122] 3.78 [0.149] 1.1 [0.043] 15.24 [0.6] 36.3 [1.429] 28.8 [1.134] [0.063] Type Display HK 07.92 7 digits 1 Electrical connection 0.4 x 1.2 mm 3.