Datasheet

2 kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 02/2023
Mechanical characteristics
Technical data
Interface characteristics
Connection M12 connector
Weight 50 g [1.76 oz]
Protection acc. to EN 60529 IP68 / IP69k
Working temperature range -30 °C ... +70 °C [-22 °F ... +158 °F]
Material plastic PBT-GF20-V0
Shock resistance 300 m/s
2
, 11 ms
Vibration resistance 100 m/s
2
, 10 ... 2000 Hz
Dimensions 60 x 30 x 20 mm [2.36 x 1.18 x 0.79“]
Voltage output
at +V 10 ... 30 V DC 0.1 ... 4.9 V
short-circuit protected to +V
at +V 5 V DC 2 ... 98 %
ratiometric (in relation to +V)
Load resistance
voltage output ≥ 40 kΩ
Output impedance
voltage output 99 ... 105 Ω
Current output 4 ... 20 mA
Load resistance current output ≤ 200 Ω
Inclinometers
Connections
ext. teach: if this input is connected to 0 V, then the
output of the inclinometer is reset to 0°.
Terminal assignment
Analog
Inclinometer
MEMS / capacitive IS40, 2-dimensional
Electrical characteristics
Power supply 5 V DC ±0.25 V or 10 ... 30 V DC
(depending on version)
Power consumption (no load) ≤ 20 mA
Reverse polarity protection yes
Measuring axes 2 (x/y)
Measuring range ±10°, ±45°, ±60°
Resolution for version ±10° ≤ 0.05°
for version ±45° ≤ 0.1°
for version ±60° ≤ 0.15°
Repeat accuracy ≤ 0.2 % of measuring range
≤ 0.1 % after a warm-up period
of 30 min
Absolute accuracy
for version ±10° 0.3°
for version ±45° and ±60° 0.5°
Cross sensitivity 3 %
Temperature drift
for version ±10° typ. 0.01°/K
for version ±45° and ±60° 0.03°/K
Reaction time 0.1 s – time that the output signal
requires to reach 90 % full scale, if
the angle is changed from -60° to +60°
Zero point adjustment
for version ±10° ±5°
for version ±45° and ±60° ±15°
Approvals
CE compliant in accordance with
EMC Directive 2014/30/EU