Datasheet

296 © Fritz Kübler GmbH, subject to errors and changes. 10/2016
Temperature displays
LED temperature displays Codix 532For thermocouple inputs J, K and N (DC)
Measuring signal inputs
Measuring rate 5 measurements / second
Input thermocouple sensor
J (Fe-CuNi)
K (Ni-CrNi)
N (NiCrSi-NiSi)
with sensor breakage monitoring
Temperature ranges J (Fe-CuNi) -210.0°C ... +1200.0°C
(according to DIN IEC 584) [-346.0°F ... +2192.0°F]
K (Ni-CrNi) -200.0°C ... +1372.0°C
[-328.0°F ... +2501.6°F]
N (NiCrSi-NiSi) -200.0°C ... +1300.0°C
[-328.0°F ... +2370.0°F6
Resolution 0.1°C (0.1°F) or 1°C (1°F)
Linearity error < 0.4 % for the whole measuring
range at an operating temperature
of 20°C [68°F]
Temperature drift 0.1 K/K
Ambient
Cold junction error ±1°C typ. / ±3°C max.
Control inputs HIGH 4 ... 30 V DC
LOW 0 ... 2 V DC
General technical data
Technical data
Display 5 digits, red 7 segment LED display;
8 mm [0.32“] high
Display refresh 1 ... 2 times per second
Data backup EEPROM
Operating temperature -20°C ... +65°C [-4°F ... +149°F]
(non-condensing)
Mechanical characteristics
Housing front panel mount 48 x 24 mm
[1.89 x 0.94“] acc. to DIN 43700;
RAL 7021, dark grey
Protection IP65 (front side)
Weight approx. 50 g [1.76 oz]
Connections screw terminal,
pitch 5.08 mm [2“] , 7 pin
Electrical characteristics
Power supply 10 ... 30 V DC, galvanically
isolated with integrated
reverse polarity protection
Current consumption max. 40 mA
EMC standards EN 55011 class B
EN 61000-6-2, EN 61000-6-3
EN 61326-1
UL approval file E128604
Transparent cover, lockable, IP65
Sealing cover type K1, IP65
for cut-out 54 x 29 [2.13 x 1.14], for screw mounting to front bezel F1B or
adapter front bezel N003001,
for counters with cut-out 50 x 25 [1.97 x 0.98] or 45 x 22.2 [1.77 x 0.87]
N003002
suitable for front bezel 60 x 50 [2.36 x 1.97], for screw mounting of electromech.
counters and via adapter front bezel N003001 for counters 48 x 24 [1.89 x 0.94] G008301
Adapter front bezel, 72 x 36 [2.83 x 1.42]
Adapter front bezel, 48 x 48 [1.89 x 1.89]
Adapter front bezel, 60 x 50 [2.36 x 1.97]
for cut-out 68 x 33 [2.68 x 1.30] to cut-out 45 x 22.2 [1.77 x 0.87],
for counters 48 x 24 [1.89 x 0.94], as set black and silver anodized 162704 Set
for cut-out 45 x 45 [1.77 x 1.77] to cut-out 45 x 22.2 [1.77 x 0.87],
with clip mounting for counters 48 x 24 [1.89 x 0.94] black T008883
for cut-out 54 x 29 [2.13 x 1.14] to cut-out 45 x 22.2 [1.77 x 0.87],
with screw mounting and gasket for counters 48 x 24 [1.89 x 0.94] black N003001
Mounting frame
with cut-out 50 x 25 [2.36 x 1.97]
via separate adapter also for 45 x 22.2 [1.77 x 0.87]
for
snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 53 x 28 [2.09 x 1.10]
and via separate adapter (T008180) for counters 48 x 24 [1.89 x 0.94] chromated G300004
Accessories Dimensions in mm [inch] Order no.
Suitable gaskets, other accessories and installation examples for optional accessories can be found in chapter accessories or in the accessories section under: www.kuebler.com/accessories.