Datasheet

ManualsBrandsKübler Automation ManualsDigital Panel MetersCODIX 522 Tachometer Codix 522

221

RoHS

IP65

DIN 48 x 24

000000

HRA

10 ... 30 V

-20°

...

+65°C

1/sec 1/min

00000

www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 10/2016

Frequency displ.

Tachometers

Frequency displays / tachometers

Order code

Output

1 = optocoupler output

2 = no output

Input switching level

0 = Standard (HTL)

A = 4 ... 30 V DC level

The Codix 522 is a simple voltage powered frequency display /

tachometer.

Display in 1/min or 1/sec, freely scalable, for fast and slow count

pulses, with 6-digit LED display for NPN, PNP input signals, with

fast HRA measurement system (High Rate Accuracy).

Powerful

• Very bright LED display, 8 mm high.

• Fast count input – input frequency max. 60 kHz.

• Robust housing – IP65 protected.

• Very accurate precise frequency measurement principle

(HRA - High Rate Accuracy System)

Frequencies up to 38 Hz are calculated using time-interval

(period duration) measurement. Frequencies > 38 Hz are

calculated using a special time base (gate time) measurement.

A very high accuracy of < 0.1 % is achieved, even with very

short gate times. The resulting measurement is available after a

max. of 50 ms.

User-friendly and universal

• Large keys – can also be operated when wearing gloves.

• Simple uniform menu-driven programming and operation.

Possible to enter the programming also during operation

with a conﬁrmation prompt.

• Individually programmable scaling – multiplication and division

factor (0.0001 to 99.9999), to display corresponding engineering

units, e.g. frequency in Hz and speed in RPM.

• Programmable decimal point, can be set from 0.0 to 0.000

(this determines the resolution).

• Programmable delay until 0 is displayed.

• Display in 1/min or 1/sec.

• As an alternative to the HTL inputs, devices with a 4 ... 30 V DC

input level are available.

• Optional output for zero-speed monitoring.

6.522 . 01 . 3 XX 0

Temperature

range

DIN front bezelPower supply

Frequency display/

Tachometer

High protection

level

Menu-driven

programming

Frequency display

with HRA

1) Stock types

LED frequency displays Codix 522Measuring range 1/min or 1/sec HRA-measurement (DC)

Delivery speciﬁcation

· Pulse counter

· Mounting clip

· Front bezel for screw mounting (T008181) 56 x 40 mm [2.20 x 1.57“], panel cut-out 50 x 25 mm [1.97 x 0.98“]

· Front bezel for clip mounting (T008180) 53 x 28 mm [2.09 x 1.10“], panel cut-out 50 x 25 mm [1.97 x 0.98“]

· Gasket

· Instruction manual, multilingual

Summary of content (3 pages)

PAGE 1
Frequency displays / tachometers LED frequency displays Measuring range 1/min or 1/sec HRA-measurement (DC) Codix 522 The Codix 522 is a simple voltage powered frequency display / tachometer. Display in 1/min or 1/sec, freely scalable, for fast and slow count pulses, with 6-digit LED display for NPN, PNP input signals, with fast HRA measurement system (High Rate Accuracy). RoHS 000000 10 ... 30 V DIN 48 x 24 -20°...
PAGE 2
Frequency displays / tachometers LED frequency displays Measuring range 1/min or 1/sec HRA-measurement (DC) Accessories Codix 522 Dimensions in mm [inch] Order no. Adapter front bezel, 72 x 36 [2.83 x 1.42] for cut-out 68 x 33 [2.68 x 1.30] to cut-out 45 x 22.2 [1.77 x 0.87], for counters 48 x 24 [1.89 x 0.94], as set black and silver anodised 162704 Set Adapter front bezel, 48 x 48 [1.89 x 1.89] for cut-out 45 x 45 [1.77 x 1.77] to cut-out 45 x 22.2 [1.77 x 0.
PAGE 3
Frequency displays / tachometers LED frequency displays Measuring range 1/min or 1/sec HRA-measurement (DC) Block diagram Codix 522 Terminal assignment 5 2 2.0 1 2 Power supply: 10...30 V DC A Count input μ processor Reset input 1 2 3 4 5 1 2 3 4 5 6 7 PIN without optocoupler PIN with optocoupler (NPN) 1 10 ... 30 V DC 1 10 ... 30 V DC 2 0 V GND 2 0 V GND 3 INP 3 INP 4 – 4 – 5 – 5 – 6 Emitter 7 Collector Display optional output Keypad Dimensions Frequency displ.