Datasheet

57www.kuebler.com
RoHS
DC
10 ... 30V
7 LCDs
DIN 48 x 24
000000
1
12345
00000
PNP/NPN
8 kHz
- 20° + 65°
IP65
© Fritz Kübler GmbH, subject to errors and changes. 10/2016
Pulse counters
Pulse counters, electronic
The Codix 140 / 142 is a simple voltage powered pulse counter
for fast and slow count pulses, with 7-digit LCD display for
NPN / PNP input signals.
Optional: can be factory pre-programmed.
Codix 140: Standard counter
Codix 142: Service counter
Order code
Standard counter
Order code
Service counter
a
Option 1
1)
, divisor
(If divisor is 1 then omit last 4 digits from code)
0002 ... 4095
Stock types
6.140.012.300
a
Option 3
1)
, service preset
005K = 5000
b
Option 2
1)
, pre-warning
00 = Pre-warning at 100 before the preset service
value, PrESErV and SErViCE
c
Option 1
1)
, divisor
(If divisor is 1 then omit last 4 digits from code)
0002 ... 4095
1) The option 1 - 3 can be programmed according to customer needs.
Please note: The min. order quantity for custom versions is 10 pcs with an extra charge,
or 200+ pcs with no extra charge.
6.140
6.142
.
.
012
011
300
300
XXXX
XXXX XXXXXX
.
.
.
. ..
a
a cb
Delivery specification
· Counter
· Mounting clip
· Gaskets
· Instruction manual, multilingual
Delivery specification
· Counter
· Mounting clip
· Gaskets
· Instruction manual, multilingual
Power supply Input type Max. count
frequency
Temperature
range
LCD displayHigh protection
level
DIN front bezel Transistor
output (142)
Lockable
reset
Functional
• Direct display of the total number of pulses.
• Key press displays preset service value and its pre-signal.
• Preset value output as display text and transistor output.
• Pre-signal for the service intervals as display text.
• Manual or electrical reset of the display or of the service
intervals.
• Fast PNP or damped NPN control via separate inputs.
User friendly
• Power supply 10 ... 30 V DC.
• Values stored in EEPROM.
• Fixed pre-programmed service intervals e.g.
Service at 5000 imp (service)
Pre-signal at 4900 imp (pre-service)
Blinking text message on the display (service or pre-service).
• Multifunction reset key can be enabled via “Reset Enable“
input.
• Reset to delivery condition possible.
• Can be factory pre-programmed.
LCD pulse counters Codix 140 / 142Adding counter / service counter (DC)