Manual

Page 3 | ENG
english
DC input modes:
Count: Fast and slow counting inputs
INP A: Fast counting input
INP B: Slow counting input
Cnt.Dir: Counting and counting direction input
INP A: Counting input
INP B: Counting direction input
Up.Dn: Differential counting input
INP A: Adding counting input
INP B: Subtracting counting input
Quad: Phase discriminator input
INP A: 0° counting input
INP B: 90° counting input
Quad2: Phase discriminator input with
pulse doubling
INP A: 0° counting input
INP B: 90° counting input
Each edge of INP A is counted.
AC input modes:
Count: Counting and reset inputs
INP A: AC/DC counting input
INP B: AC/DC reset input
Cnt.Dir: Counting and counting direction input
INP A: AC/DC counting direction input
INP B: AC/DC counting input
Up.Dn: Differential counting input
INP A: AC/DC subtracting counting input
INP B: AC/DC adding counting input
1.10 Operation
Is the device set and programmed correctly (function;
for counters, max. counting frequency)?
1.11 Failure possibilities and causes
Impossible to use the keys:
• Key lock input activated
Counter does not count:
• Wrong or reversed wiring of the counting input
• Setting of an input signal not matching the pulse gen-
erator
• Polarity (NPN/PNP) reversed
• No ground connection between the pulse generator
and the counter
• Maximum counting frequency exceeded
• Signal levels do not reach the switching threshold of
the counter
If, despite all, your device still does not operate, contact
your local representative or call us directly for technical
support.
When sending your device back, please attach a short
description of the failure, of the programming and of the
connection diagram, in order to allow us to reproduce
a possibly existing defect and to repair your device as
quickly as possible.
Overview
Model Operating mode Counting inputs
INP A INP B
6.130.012.8x0 Count 0…0,7 V DC
NPN
7 kHz 0…0,7 V DC
NPN 30 Hz
6.130.012.8x2 4…30 V DC
PNP
12 kHz 0…0,7 V DC
PNP
6.130.012.8x3 10…260 V AC/DC
AC/DC
30 Hz 10…260 V AC/DC
AC/DC –
6.131.012.8x0 Cnt.Dir/Up.Dn 0…0,7 V DC
NPN
7 kHz 0…0,7 V DC
NPN
7 kHz
6.131.012.8x1 4…30 V DC
PNP
12 kHz 4…30 V DC
PNP
12 kHz
6.131.012.8x3 Up.Dn 10…260 V AC/DC
AC/DC
30 Hz 10…260 V AC/DC
AC/DC
30 Hz
6.132.012.8x3 Cnt.Dir 10…260 V AC/DC
AC/DC
30 Hz 10…260 V AC/DC
AC/DC
30 Hz
6.133.012.8x0 Quad/Quad2 0…0,7 V DC
NPN
3 kHz 0…0,7 V DC
NPN
3 kHz
6.133.012.8x1 4…30 V DC
NPN
6 kHz 4…30 V DC
NPN
6 kHz
Table 1
Options: x = 5: no backlight
x = 6: with backlight