Datasheet

49www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 10/2016
Pulse counters
Pulse counters, electronic
Display LCD, 8 digits, 8 mm [0.32“] high
Backlighting external electrical source
24 V DC ±20 %, 50 mA
Modes adding or subtracting
(selectable)
Display range -9999999 ... 99999999,
with overflow display
Reset manual and electrical
Working temperature -10°C ... +55°C [+14°F ... +131°F]
(non-condensing)
Operating temperature -10°C ... +60°C [+14°F ... +140°F]
(non-condensing)
Storage temperature -20°C ... +70°C [-4°F ... +158°F]
Altitude up to 2000 m [6562‘]
Housing dark grey RAL 7021
Protection IP65 (front side)
Weight approx. 50 g [1.76 oz]
Power supply internal lithium battery
approx. 8 years at 20°C [68°F]
EMC standards EN 55011 class B,
EN 61000-6-2, EN 61000-6-3
Device safety designed to EN 61010 part 1
protection class 2
application area pollution level 2
UL approval file E128604
Counting input of the DC-versions (max. 30 V DC)
slow counting input max. 30 Hz NPN
fast counting input max. 12 kHz (PNP), 7 kHz (NPN)
switching level NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 30 V DC
switching level PNP LOW 0 ... 0.7 V DC
HIGH 4 ... 30 V DC
Counting input of the high voltage versions (10 ... 260 V DC/V AC)
optocoupler input, max. 30 Hz
min. pulse time 16 ms
switching level LOW 0 ... 2 V AC/DC
HIGH 10 ... 260 V AC/DC
Counting direction switching (only DC-version)
mode adding / subtracting
contact input open collector NPN
(switching at 0 V)
switching level NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 5 V DC
Reset input (only DC and high voltage)
minimum pulse time DC 50 ms
high voltage 16 ms
contact input DC – NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 30 V DC
high voltage input 10 ... 260 V AC/DC
Electrical reset key locking (for DC and high voltage)
contact input open collector NPN
(switching at 0 V)
switching level NPN LOW 0 ... 0.7 V DC
HIGH 3 ... 5 V DC
General technical data
Technical data
Mechanical characteristics
Counting inputs
Electrical characteristics
Transparent cover, lockable, IP65
Sealing cover type K1, IP65
for cut-out 54 x 29 [2.13 x 1.14], for screw mounting to front bezel F1B or
adapter front bezel N003001,
for counters with cut-out 50 x 25 [1.97 x 0.98] or 45 x 22.2 [1.77 x 0.87]
N003002
suitable for front bezel 60 x 50 [2.36 x 1.97], for screw mounting of electromech.
counters and via adapter front bezel N003001 for counters 48 x 24 [1.89 x 0.94] G008301
Suitable gaskets, other accessories and installation examples for optional accessories can be found in chapter accessories or in the accessories section under: www.kuebler.com/accessories.
Adapter front bezel, 72 x 36 [2.83 x 1.42]
Adapter front bezel, 48 x 48 [1.89 x 1.89]
Adapter front bezel, 60 x 50 [2.36 x 1.97]
for cut-out 68 x 33 [2.68 x 1.30] to cut-out 45 x 22.2 [1.77 x 0.87],
for counters 48 x 24 [1.89 x 0.94], as set black and silver anodised 162704 Set
for cut-out 45 x 45 [1.77 x 1.77] to cut-out 45 x 22.2 [1.77 x 0.87],
with clip mounting for counters 48 x 24 [1.89 x 0.94] black T008883
for cut-out 54 x 29 [2.13 x 1.14] to cut-out 45 x 22.2 [1.77 x 0.87],
with screw mounting and gasket for counters 48 x 24 [1.89 x 0.94] black N003001
Mounting frame
with cut-out 50 x 25 [2.36 x 1.97]
via separate adapter also for 45 x 22.2 [1.77 x 0.87]
for snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 53 x 28 [2.09 x 1.10]
and via separate adapter (T008180) for counters 48 x 24 [1.89 x 0.94] chromated G300004
Accessories Dimensions in mm [inch] Order no.
Codix 130Adding or subtracting (battery)LCD pulse counters