Datasheet

89www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 10/2016
Pulse counters
Pulse counters, electromechanical
Electrical connection
panel mount, base mount flying leads, AWG 22
approx. 150 mm [5.91“] ,
6 mm [0.24“] stripped wire ends, tinned
PCB mount solder pins ø 0.4 x 1.2 mm [0.016 x 0.047“]
Power consumption (at 20°C [68°F] and normal voltage))
at 10 Hz (type 0) approx. 50 mW
at 25 Hz (type 1) approx. 250 mW
at 10 Hz (type a0) approx. 800 mVA
Rated voltage type 0 1.5 / 3 / 4.5 / 5 / 6 / 12 / 24 V DC, -10 %, +20 %
type 1 3 / 4.5 / 5 / 6 /12 /24 V DC, ±10 %
type a0 12 / 24 /115 / 230 V AC, ±10 %
Counting frequency max. 10 and 25 Hz
Pulse duration
at 10 Hz (type 0 and a0) min. 50 ms
at 25 Hz (type 1) min. 20 ms
Pulse interval
at 10 Hz (type 0 a0) min. 50 ms
at 25 Hz (type 1) min. 20 ms
Cycle duration factor 100 %
Number of digits 4, 5, 6 and 7
Counting system adding
Height of figures K 04, K 06, AK 06 4 x 1.7 mm [0.16 x 0.067“] optical
K 05, K 07, AK 07 4 x 1.2 mm [0.16 x 0.047“] optical
Color of figures white on black
Reset no reset
Operating temperature -10°C ... +60°C [+14°F ... +140°F]
(non-condensing)
Mounting position horizontal, other on request
Soldering temperature 265°C [+509°F], 3 s
Operating life > 50 x 10
6
pulses
Solderable and wash proof types
K 0X.92, K 06.90, K 07.90
Protection K 0X.92, K 0X.90 IP65
AK 0X.00, K 0X.80, K 0X.20 IP65 (only front side)
other types depending on kind of mounting
UL approval file E128604
Housing PC (Polycarbonate), transparent
or sheet steel types (see table) with
IP65 protection, fully sealed (potted)
Weight 15 ... 18 g [0.53 ... 0.63 oz]
EMC standards EN 55011 class B
EN 61000-6-2, EN 61000-6-3
Device safety designed to EN 61010 part 1
protection class 2
application area pollution level 2
UL approval file E128604
K 0x.20 flat pin 0.5 x 2.8 mm [0.020 x 0.11“] Art. no.: 1.1X7.XX0.XXX
flat pin 0.4 x 1.2 mm [0.016 x 0.047“] Art. no.: 1.1X9.XX0.XXX
• different voltages
• version not potted
• different figure colors
• different lengths of flying leads
• different connections
• different temperature range, depends on version
-30°C ... +85°C [-22°F ... +185°F] or
-20°C ... +70°C [-4°F ... +158°F]
Technical data
Options
Micro counters K 04 ... K 07 / AK 07High shock resistance (AC+DC)
Accessories Dimensions in mm [inch] Order no.
Gasket 32 x 15 [1.26 x 0.59]
for cut-out 27 x 13 [1.06 x 0.51], suitable for K 06.20 and K 07.20 N511058