User Manual

Press and hold the Power button for up 5 seconds until first lights illuminate.
Wait for KUBE to start up (about 30 seconds).
Once complete, the KUBE startup sound plays and all button lights will illuminate.
01 // TURN KUBE ON
QUICK START GUIDE
Short press Connect button until blue to put in Bluetooth mode. Press and
hold Connect button for 2 seconds.
The Connect LED begins to blink blue/red to indicate that it is in pairing
mode and you will hear an audio confirmation.
When the unit connects to a Bluetooth device, the Connect button and LED
should become solid blue and you will hear an audio confirmation.
03 // GET CONNECTED VIA BLUETOOTH
Download and open the latest KubeSync App on your device.
Short press Connect button until white to put in Wifi mode. Press and hold
Connect button for 2 seconds.
The Connect LED begins to blink white/red to indicate that it is broadcasting the
setup network and you will hear an audio confirmation.
When the unit connects to a Wifi network, the Connect button and LED should
become solid white and you will hear an audio confirmation. The unit will
remember the last Wifi network after powering off and on.
Follow the instructions on the KubeSync App to connect your Kube4 to the
network.
Once connected, the App will automatically search for the latest firmware and
begin installation.
02 // GET CONNECTED VIA WIFI AND UPDATE FIRMWARE
KUBESOUND.COM
SECONDS
5
CONNECT BUTTON
ACCESS THE FULL USER MANUAL
FOR MORE FEATURES INCLUDING:
Outdoor Mesh Mode
Syncing Multiple Kube4s
Microphone Mixing
PA Mode