User Manual

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings.
7. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Protect the power cord from being walked on or pinched at plugs, convenience receptacles, and the point where they
exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, or objects have fallen into the apparatus, the apparatus does not operate
normally, or has been dropped.
This symbol on the product means there is uninsulated,
dangerous voltage within the product enclosure that may
present a risk of electrical shock.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
• This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body.
• The plug on the power supply cord shall connect to a socket-outlet with an earthing (grounded) connection.
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
WARNING: This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
This symbol means there are important operating and
maintenance instructions in this guide.
IMPORTANT SAFETY INSTRUCTIONS : Please read and keep all safety and use instructions.
• Keep the product away from fire and heat sources.
• Do NOT place naked flame sources, such as lighted candles, on or near the product.
• Do NOT make unauthorized alterations to this product.
• Do NOT use a power inverter with this product.
• The speaker wire and interconnect cables included with this system are not approved
for in-wall installation. Please check your local building codes for the correct type of
wire and cable required for in-wall installation.
• Where the main plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
• Use at altitude less than 2000 meters only.
• Due to ventilation requirements, KubeSound does not recommend placing the
product in a confined space such as in a wall cavity or in an enclosed cabinet.
• Do not place or install the product near any heat sources, such as fireplaces,
radiators, heat registers or other apparatus (including amplifiers) that produce heat.
• Danger of explosion or leakage of flammable liquid or gas if battery is incorrectly
replaced. Replace only with the same or equivalent battery.
• Disposal of a battery into a fire or hot oven, or mechanically crushing or cutting of
the battery can result in an explosion.
• Leaving a battery in an extremely high temperature environment can result in an
explosion or the leakage of flammable liquid or gas.
• Battery cannot be subjected to high or low extreme temperatures, or low air
pressure at high altitude during storage or transportation.
• A battery subjected to extremely low air pressure may result in an explosion or the
leakage of flammable liquid or gas.
• The device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite systems