Palapala a ka mea nona

24
Maintenance
Service Manual
Steps Procedure
10
11
12
13
Remove aspiration and discharge pipes
Unsolder pipe connecting to compressor.
Then remove aspiration and discharge
pipes.
Remove compressor
Remove 3 hold-down nuts of compressor
and then remove compressor.
Remove power cord
Remove 2 screws showing in the picture
and
then remove wire clamp. Then remove
power cord.
Remove castors
Remove 8 connection screws of 4 castors.
Then remove the castors.
nuts
screws
castors
discharge pipe
compressor
aspiration pipe