Daim Ntawv Qhia Tus Neeg Siv

98Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
SHIFT Sets right locator by current
playhead position.
F5 While held down, MUTE buttons set
automation mode to Write.
SHIFT Sets punch in locator by current
playhead position.
F6
SHIFT Sets punch out locator by current
playhead position.
F7 Sets pots to Pan/Send mode
(display shows “PA”).
SHIFT Enables or disables metronome
click.
F8 Sets pots to Instrument Edit mode
(display shows “In”).
F9 Sets pots to Effect Edit mode
(display shows “P1”–“P9”).
JLCooper CS-32MiniDesk cursor controls in Logic Pro
The table outlines the cursor controls and their assignments:
Note:If a modifier button, such as SHIFT, is shown below a description, it indicates that the
control has an alternate use while the modifier is held down.
Control Modifier Assignment
Up Zooms out vertically.
SHIFT In Effect Edit mode: moves up
one Insert slot (unless top slot is
selected).
Down Zooms in vertically.
SHIFT In Effect Edit mode: moves down
one Insert slot (unless bottom slot).
Left Zooms out horizontally.
SHIFT In Instrument and Effect Edit modes:
decrements current parameter bank
(moves down one bank, or page, of
parameters).
Right Zooms in horizontally.
SHIFT In Instrument and Effect Edit modes:
increments current parameter bank
(moves up one bank, or page, of
parameters).