Daim Ntawv Qhia Tus Neeg Siv

97Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
F5 Switches automation mode between
Write and Off (display shows “Wr”).
ARM Turns Record Enable button on or
off.
Faders Control volume. As the faders
don’t offer feedback, Pickup mode
is used, as per the pots. See
the pickup information in
CS-
32MiniDesk pots
.
JLCooper CS-32MiniDesk bank button in Logic Pro
The table outlines the bank controls and their assignments:
Control Assignment
Small red button with green LED LED off: Black labels of channel strip buttons apply (TRK/LOC/ARM).
LED on: White labels of channel strip buttons apply (PAN/SOLO/MUTE).
JLCooper CS-32MiniDesk F keys in Logic Pro
The table outlines the Fkey controls and their assignments:
Note:If a modifier button, such as SHIFT, is shown below a description, it indicates that the
control has an alternate use while the modifier is held down.
Control Modifier Assignment
SHIFT Modifier for function of other
controls. See SHIFT entries in left
column.
F1 While held down, MUTE buttons 1–6
enable/disable automation of certain
parameters (see MUTE).
SHIFT Enables or disables Cycle mode.
F2 While held down, MUTE buttons set
automation mode to Read.
SHIFT Enables or disables Autopunch
mode.
F3 While held down, MUTE buttons set
automation mode to Touch.
SHIFT Sets left locator by current playhead
position.
F4 While held down, MUTE buttons set
automation mode to Latch.