Daim Ntawv Qhia Tus Neeg Siv

85Control Surfaces Support Guide for Logic Pro
CM Labs Motormix Solo and Mute buttons in Logic Pro
These buttons switch the solo and mute state of the displayed channel.
Note:In modal dialogs, the SOLO and MUTE buttons generate the computer keyboard
character shown on the button face.
CM Labs Motormix view controls in Logic Pro
The table outlines the view controls and their assignments.
Note:If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
Control Modifier Assignment
Left/right buttons In Effect and Instrument Plug-in Edit
modes: shifts the parameter bank.
In other modes:
• If BANK LED is off: shifts the
fader bank by one channel.
• If BANK LED is on: shifts the
fader bank by one bank (a group
of eight channels).
SHIFT In Effect and Instrument Plug-in Edit
modes: shifts the parameter bank
by one parameter. In Group Edit
mode, the group parameter bank is
shifted.
bank Switches mode of left/right buttons
(see above).
SHIFT Sets the Select buttons to Channel
View.
group Sets the Select buttons, rotary
encoders, and Multi buttons to
Group Edit mode.
SHIFT Displays channels’ group
assignments in the LCD. The rotary
encoders allow you to change
assignments.