Daim Ntawv Qhia Tus Neeg Siv

83Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
Rotary Selector Selects a slot or parameter for
rotary encoders, depending on the
parameter types being edited with
the rotary encoders:
• Send slot when editing send level
or assigning send destination
• EQ band when editing an EQ
parameter
• Effect/Instrument slot when
assigning an effect or instrument
• Pan/Surround parameter when
editing a Pan/Surround parameter
• Channel parameter when editing
a channel parameter
• Effect/instrument parameter
page when editing an effect or
instrument plug-in
Rotary Selector push button Switches Flip mode between Off and
Duplicate (faders mirror the rotary
encoder assignments).
SHIFT Switches the channel strip display
mode between:
• Page info in upper line, parameter
name in lower line
• Parameter name in upper line,
parameter value in lower line
CM Labs Motormix multi buttons in Logic Pro
These buttons (labeled A to H) have multiple uses depending on the current mode, as
indicated by the green and yellow LEDs to the right.
Note:If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
Mode Modifier Assignment
fx bypass Enables or disables bypass of the
currently selected insert effect.
SHIFT (eff-1) Enables or disables bypass of the
currently selected EQ band, and
switches rotary encoders to EQ
frequency editing.
s-mute Enables or disables bypass of the
currently edited send, and switches
rotary encoders to send level
editing.
SHIFT (eff-2) Enables or disables bypass of the
currently selected EQ band, and
switches rotary encoders to EQ Gain
editing.