Daim Ntawv Qhia Tus Neeg Siv

7Control Surfaces Support Guide for Logic Pro
Moving a fader on the control surface prompts the corresponding fader in the Logic Pro
Mixer to move, and rotary knobs (or other controls) can be used to control EQ or other
parameters, with the corresponding parameters updating instantly in Logic Pro.
Because communication between Logic Pro and your control surface is bidirectional,
adjustments to parameter values onscreen are immediately reflected by the corresponding
control on the control surface. Visual feedback on the control surface is determined by the
facilities of the device itself, such as LCD screens, LED indicators, or motorized faders.
When you use a supported control surface with Logic Pro, some controls are pre-mapped
to common functions. You can map unassigned controls to other Logic Pro commands and
functions.
For detailed information about how to assign controllers on your control surface device to
Logic Pro functions, see Assign hardware controllers in the Logic Pro User Guide.
For devices supported by Lua scripts, you can also remap controls in this way, or you
can use the Smart Controls mapping options. See Use Smart Controls in the Logic Pro
User Guide.
The following sections explain how to use specific control surfaces with Logic Pro.