Daim Ntawv Qhia Tus Neeg Siv

57Control Surfaces Support Guide for Logic Pro
Mackie Control Jog/Scrub wheel in Logic Pro
The table outlines the Jog/Scrub wheel controls and their functions:
Control Modifier Function
Jog wheel — Move the playhead forward or back.
CYCLE Set the left locator to the current
playhead position, advance the
playhead as normal, then set
the right locator to the playhead
position. Further jog wheel turns
while still holding down CYCLE
advances the playhead and sets the
right locator again. Tip: Rotating the
jog wheel counterclockwise while
holding down CYCLE defines a skip-
cycle range.
DROP Set the punch in locator to the
current playhead position, advance
the playhead as normal, then set the
punch out locator to the playhead
position. Further jog wheel turns
while still holding down DROP
advances the playhead and sets the
punch out locator again.
SCRUB button — Activate/deactivate Scrub mode.
SHIFT Enable Shuttle mode on the jog
wheel (SCRUB button LED flashes).
Mackie Control external inputs in Logic Pro
The table outlines the external input controls and their functions:
Input Modifier Function
USER SWITCH A — Play/Stop
USER SWITCH B — Record
EXTERNAL CONTROL — Master Volume