Daim Ntawv Qhia Tus Neeg Siv

44Control Surfaces Support Guide for Logic Pro
MackieControl foot switches in Logic Pro
You can connect a momentary foot pedal—with either positive or negative polarity—to the
foot switch sockets. By default, foot switches control the outlined functions:
• USER SWITCH A is assigned to Start/Stop.
• USER SWITCH B is assigned to Record. (Note that a track must be selected and armed
for recording to take place.)
• EXTERNAL CONTROL is assigned to the MASTER fader level. Use only an expression
pedal with this socket.
The polarity of the foot switches is determined by the MackieControl when powered up.
You should first connect the foot switches, then turn on the MackieControl.
MackieControl assignments
MackieControl assignments in Logic Pro
Each of these sections outline how MackieControl interface elements are assigned to
Logic functions.
• Display buttons table
• Channel strips assignments table
• Assignment buttons table
• Assign Function keys table
• Global View buttons table
• Modifier buttons table
• Automation buttons table
• Utilities buttons table
• Transport buttons table
• Cursor keys table
• Jog/Scrub wheel assignments table
• External inputs table