Daim Ntawv Qhia Tus Neeg Siv

25Control Surfaces Support Guide for Logic Pro
Remove a plug-in
Preselect the “--” value (by rotating the V-Pot fully counterclockwise), then press the
V-Pot button of the appropriate Insert slot.
The MackieControl does not switch to Plug-in Edit view, and no plug-in window opens
when the “--” value is chosen. If a plug-in window is open, it closes (if Link mode is
inactive).
Mackie Control Plug-in Channel view in Logic Pro
This view shows the plug-ins associated with all Insert slots for the selected channel.
In Plug-in Channel view:
• The mode display shows the text “PL.”
• The upper LCD row shows Ins1Pl through Ins8Pl.
• The lower LCD row shows the plug-in that is currently selected for this Insert slot.
Muted plug-ins are indicated by an asterisk (*), which precedes the plug-in name.
• Rotating the V-Pots preselects a new plug-in. The plug-in name flashes until activated.
• Rotating another channel’s V-Pot cancels any previous preselection and starts
preselection on the newly selected channel strip.
• Pressing a V-Pot button:
• Activates the preselected plug-in (assuming that you’ve made your preselection by
rotating the V-Pot).
• Opens a plug-in window if none is open. (If a plug-in window is open and Link mode
is turned on, the selection of another plug-in replaces the existing plug-in.)
• Switches to Plug-in Edit view.
• Pressing a V-Pot button while the SHIFT button is held down mutes/unmutes the
plug-in.
Remove a plug-in
Preselect the “--” value (by rotating the V-Pot fully counterclockwise), then press the
V-Pot linked to the appropriate Insert slot.
The MackieControl does not switch to Plug-in Edit view, and no plug-in window opens. If
one was previously opened, it closes (if Link mode is inactive).