Daim Ntawv Qhia Tus Neeg Siv

214Control Surfaces Support Guide for Logic Pro
Yamaha DM2000 Effect/Plug-in controls in Logic Pro
The table outlines the EFFECT/PLUG-IN controls and their assignments.
Note:A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier is
held down. Modifier buttons that need to be assigned manually by the user are shown with
an asterisk (*) that precedes the button name.
Control Modifier Assignment
Display Opens or closes the Sample Editor.
6 Switches display between “track
name/parameter name” and
“parameter name/parameter value”
modes.
7 Switches the bypass state of Insert
slot that is currently being edited.
8 Switches between Plug-in
Assignment and Plug-in Edit modes.
Parameter Up & Parameter Down Plug-in Edit mode: shifts the
parameter display to show the next/
previous page of parameter controls
(usually four) for the selected
plug-in.
*USER 13 Plug-in Edit mode: shifts the
parameter display up/down by one
parameter for the selected plug-in.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Pan Assignment mode:
• Parameter control 1 button
centers pan or surround angle.
• Parameter control 2 button
centers surround diversity.
• Parameter control 3 button resets
surround LFE level.
• Parameter control 4 button resets
spread.
Send Assignment mode:
• Enables or disables Sends 1 to 4
or 5 to 8.
Plug-in Assignment mode:
• Confirms the plug-in selection for
Insert slots 1 to 4 or 5 to 8, and
enters Plug-in Edit mode for the
selected Insert slot.
Plug-In Edit mode:
• Sets value to default, or switches
buttons with two states.