Daim Ntawv Qhia Tus Neeg Siv

211Control Surfaces Support Guide for Logic Pro
DM2000 assignments
Overview of Yamaha DM2000 assignments in Logic Pro
These sections outline the assignment of YamahaDM2000 interface elements to Logic
functions.
• DM2000 Matrix Select controls
• DM2000 Aux Select controls
• DM2000 Encoder and Fader Mode controls
• DM2000 Display Access controls
• DM2000 Effect/Plug-in controls
• DM2000 LCD display
• DM2000 Track Arming controls
• DM2000 Automix controls
• DM2000 Locator controls
• DM2000 Transport and cursor controls
• DM2000 Channel strips
• DM2000 Assignable keys
Yamaha DM2000 Matrix Select controls in Logic Pro
The table outlines the MATRIX SELECT controls and their assignments.
Control Assignment
MATRIX 1 Switches SEL buttons and encoder buttons between normal behavior and
setting a parameter’s default value. When the AUX 6 button is held down:
• Pressing a channel strip’s SEL button resets the channel strip’s volume
level.
• Pressing a channel strip’s encoder button resets the channel strip’s
pan/surround value. (PAN also needs to be selected in the ENCODER
MODE section.)
MATRIX 2 Switches the encoder buttons between Send Position and Send Mute
mode.
MATRIX 4 If ENCODER MODE [ASSIGN 4] is on, switches the channel strip SEL
buttons between Insert Select (indicator off) and Insert Bypass (indicator
on) modes.