Daim Ntawv Qhia Tus Neeg Siv

205Control Surfaces Support Guide for Logic Pro
Yamaha DM1000 stereo channel strip control in Logic Pro
The table outlines the stereo channel strip control and its assignment:
Control Assignment
AUTO Switches channel strip SEL buttons between channel and insert selection
duties.
Yamaha DM1000 assignable keys in Logic Pro
The assignable keys can be assigned to the functions outlined in the table.
Note:A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier buttons
that need to be assigned manually by the user are shown with an asterisk (*) that precedes
the button name.
Control Modifier Assignment
DAW WIN STATUS Opens or closes the Project Audio
Browser.
DAW REC/RDY 1 to 16 Enables or disables the Record
Enable button of the specified
channel strip.
DAW WIN TRANSPORT Opens or closes the Control bar
window.
DAW BANK– Shifts channel strips by one bank to
the left.
DAW BANK+ Shifts channel strips by one bank to
the right.
DAW SHIFT/ADD Enables a second function/use for
some buttons.
DAW OPTION/ALL While held down, Value Change
mode is set to Full. Turning the
encoder to the right sets the
maximum value. Turning it to the
left sets the minimum value. The
encoder also stops at its default
value. Also see description of other
buttons.