Daim Ntawv Qhia Tus Neeg Siv

204Control Surfaces Support Guide for Logic Pro
Yamaha DM1000 DM1000 channel strips in Logic Pro
The table outlines the channel strip controls and their assignments.
Note:A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier buttons
that need to be assigned manually by the user are shown with an asterisk (*) that precedes
the button name.
Control Modifier Assignment
Encoder Adjusts parameter selected in the
ENCODER MODE and AUX SELECT
sections.
Encoder Select button Pan selected: sets pan to center
position.
Send 1 to 8 selected: edits Send
pre/post position, Send mute on or
off, or sets Send level to default
value.
Send Assign, Input, or Output
selected: confirms selection.
SEL If AUTO off:
• AUX 8 off: selects channel strip.
• AUX 8 on: selects channel strip
for insert assignment.
If AUTO on:
• Cycles through automation
modes. With an automation
mode button held down, sets this
automation mode.
*DAW SHIFT/ADD Resets the volume level.
SOLO Enables or disables the Solo button.
*DAW OPTION/ALL Disables Solo button of all channel
strips.
ON Enables or disables the Mute
button.
*DAW OPTION/ALL Unmutes all channel strips.
Fader Adjusts volume, or duplicates
encoder assignment in Flip mode.