Daim Ntawv Qhia Tus Neeg Siv

203Control Surfaces Support Guide for Logic Pro
Yamaha DM1000 Channel display mode in Logic Pro
Press the F3 button to select Channel display mode. In this mode, the parameter controls,
such as pan and send level, for channel strips 1 to 16 are displayed.
Control Assignment
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
When Send 1 to 8 is selected: edits Send pre/post fader position, enables
or disables Send mute, or sets Send level to default value.
Send, Input, or Output Assignment mode: confirms selection.
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Adjusts parameter selected in the ENCODER MODE and AUX SELECT
sections.
Yamaha DM1000 Meter display mode in Logic Pro
Press the F4 button to select Meter display mode. In this mode, the level meters for
channel strips 1 to 16 are displayed.
Control Assignment
Level Meters Display momentary and peak level.
Yamaha DM1000 data entry controls in Logic Pro
The table outlines the data entry controls and their assignments.
Note:A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier buttons
that need to be assigned manually by the user are shown with an asterisk (*) that precedes
the button name.
Control Modifier Assignment
Parameter wheel Default: adjusts the value of the
currently selected parameter.
* DAW SHUTTLE Switches the parameter wheel to
Shuttle mode.
* DAW SCRUB Switches the parameter wheel to
Scrub mode.
[DEC] button Default: exits folder.
In Go to Marker dialog: cancels
dialog.
* DAW ALT/FINE Opens or closes the Project Audio
Browser.
[INC] button Enters the selected folder.