Daim Ntawv Qhia Tus Neeg Siv

200Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
AUX 5 In Insert Display mode:
• Assigns Send 5 level of channel
strips to encoders.
• Assigns Send 5 level of the
selected channel strip to virtual
encoders.
• Assigns Sends 5 to 8 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 5 to 8.
In Channel Display mode:
• Assigns Send 5 level of channel
strips to encoders and virtual
encoders.
• Shows current Send 5 destination
assignment, when button is held
down.
AUX 6 Switches SEL buttons and encoder
buttons between normal behavior
and setting a parameter’s default
value. When the AUX 6 button is
held down:
• Pressing a channel strip’s SEL
button resets the channel strip’s
volume level.
• Pressing a channel strip’s
encoder button resets the
channel strip’s pan/surround
value. (PAN also needs to be
selected in the ENCODER MODE
section.)
AUX 8 Determines mode of channel strip
SEL buttons when the STEREO
section AUTO button is off:
• AUX 8 indicator off: SEL button
used for channel strip selection
• AUX 8 indicator on: SEL button
used for Insert selection