Daim Ntawv Qhia Tus Neeg Siv

20Control Surfaces Support Guide for Logic Pro
• Pressing a V-Pot button sets the parameter to its default value.
• The Cursor Up/Cursor Down buttons switch to the next or previous EQ band.
• The Cursor Left/Cursor Right buttons switch to the next or previous EQ parameter. The
selected parameter is displayed briefly in the upper LCD row.
• Pressing a MUTE button while holding down the SHIFT button switches the current EQ
band’s Bypass state.
• When Flip mode is turned on, the MUTE buttons display, and switch, the current EQ
band’s Bypass state.
Note:Ensure that the ZOOM button isn’t active when using the cursor buttons.
Mackie Control EQ Channel view in Logic Pro
EQ Channel view allows you to edit all EQ parameters—in all bands—for the selected
channel strip.
• The mode display shows EQ (EQ channel strip).
• The upper row of the LCD shows the name of the channel strip, EQs, the page number,
and the total number of pages (for example: “Page 1/2”).
Control Action
V-Pot 1 Edits the frequency of odd-numbered EQ bands.
V-Pot 2 Edits the gain of odd-numbered EQ bands.
V-Pot 3 Edits the Q-factor of odd-numbered EQ bands.
V-Pot 4 Switches the bypass state of odd-numbered EQ bands.
V-Pot 5 Edits the frequency of even-numbered EQ bands.
V-Pot 6 Edits the gain of even-numbered EQ bands.
V-Pot 7 Edits the Q-factor of even-numbered EQ bands.
V-Pot 8 Switches the bypass state of even-numbered EQ bands.
The Cursor Left and Cursor Right buttons switch to the next or previous EQ band. The LCD
displays two EQ bands. If you have one or more connected MackieControl (XT) units, each
XT can display two EQ bands—up to a total of eight bands.
Note:Ensure that the ZOOM button isn’t active when using the cursor buttons.