Daim Ntawv Qhia Tus Neeg Siv

187Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
DAW WIN TRANSPORT Opens or closes the Control bar
window.
DAW BANK– Shifts channel strips by one bank to
the left.
DAW BANK+ Shifts channel strips by one bank to
the right.
DAW SHIFT/ADD Enables a second function/use for
some buttons.
DAW OPTION/ALL While held down, Value Change
mode is set to Full. Turning the
encoder to the right sets the
maximum value. Turning it to the
left sets the minimum value. The
encoder also stops at its default
value. See description of other
buttons.
DAW GROUP STATUS Enters Group Edit mode:
• When a channel strip group
is selected, channel strip
membership is indicated by a lit
SEL button. Use this button to
enable/disable the channel strip’s
group membership.
• Virtual encoders 1 to 4 display
properties of the currently
selected group.
• Virtual encoder buttons 1 to 4
enable/disable properties of the
currently selected group.
• When INSERT/PARAM is set to
PARAM, the left and right Tab
Scroll buttons scroll through
the group properties. When set
to INSERT, the buttons scroll
through the groups for editing.
DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal flow.
DAW SUSPEND GROUP Enables or disables the Group
Clutch.
DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal flow.
DAW CREATE GROUP Creates a new group and enters
Group Edit mode (see above).