Daim Ntawv Qhia Tus Neeg Siv

182Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
AUX 5 In Insert Display mode:
• Assigns Send 5 level of channel
strips to encoders.
• Assigns Send 5 level of the
selected channel strip to virtual
encoders.
• Assigns Sends 5 to 8 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 5 to 8.
In Channel Display mode:
• Assigns Send 5 level of channel
strips to encoders and virtual
encoders.
• Shows current Send 5 destination
assignment, when button is held
down.
AUX 6 Switches SEL buttons and encoder
buttons between normal behavior
and setting a parameter’s default
value.
When the AUX 6 button is held
down:
• Pressing a channel strip’s SEL
button resets the channel strip’s
volume level.
• Pressing a channel strip’s
encoder button resets the
channel strip’s pan/surround
value (PAN also needs to be
selected in ENCODER MODE
section).
AUX 7 Assigns Pan to encoders; assigns
selected channel strip’s pan/
surround parameters to virtual
encoders.
AUX 8 Determines mode of channel strip
SEL buttons:
• AUX 8 indicator off: SEL button
used for channel strip selection.
• AUX 8 indicator on: SEL button
used for Insert selection.
HOME Enables or disables Flip mode.