Daim Ntawv Qhia Tus Neeg Siv

175Control Surfaces Support Guide for Logic Pro
US-2400 encoder assignments
Overview of Tascam US-2400 encoder assignments in Logic Pro
The table outlines the standard assignment of the encoders. Also see Instrument Edit view
and
Plug-in Edit view for information on alternate use of the encoders.
Note:A modifier button, such as SHIFT, below a control description indicates that the
control has an alternate use while the modifier is held down.
Control Modifier Assignment
CHAN Switches encoders to Channel view
(see encoders’ legend); CHAN
button LED is lit.
F-KEY Switches encoders to Instrument
Edit view; CHAN button LED flashes.
See
Instrument Edit view for details.
PAN Switches encoders to Mixer
(multichannel) view of pan controls;
PAN button LED is lit.
F-KEY Switches encoders to Plug-in Edit
view; PAN button LED flashes. See
Plug-in Edit view for details.
AUX 1 Switches encoders to Mixer view of
Send 1 level (for all channels).
F-KEY Opens or closes Tracks window.
AUX 2 Switches encoders to Mixer view of
Send 2 level.
F-KEY Opens or closes Event List.
AUX 3 Switches encoders to Mixer view of
Send 3 level.
F-KEY Opens or closes Score Editor.
AUX 4 Switches encoders to Mixer view of
Send 4 level.
F-KEY Opens or closes Project Audio
Browser.
AUX 5 Switches encoders to Mixer view of
Send 5 level.
F-KEY Opens or closes Step Editor.
AUX 6 Switches encoders to Mixer view of
Send 6 level.
F-KEY Opens or closes Piano Roll Editor.