Daim Ntawv Qhia Tus Neeg Siv
Table Of Contents
- Contents
- Control surfaces
- Mackie Control
- Mackie Control overview
- Mackie Control displays
- Mackie Control channel strips
- Mackie Control assignment buttons
- Mackie Control fader bank buttons
- Function keys
- Modifier buttons
- Automation buttons
- Group button
- Utilities buttons
- Mackie Control transport buttons
- Cursor and zoom keys
- Jog/Scrub wheel
- Programmable user modes
- Foot switches
- Mackie Control assignments
- Assignments overview
- Display buttons table
- Channel strips assignments table
- Assignment buttons table
- Assign Function keys table
- Global View buttons table
- Modifier buttons table
- Automation buttons table
- Utilities buttons table
- Transport buttons table
- Cursor keys table
- Jog/Scrub wheel assignments table
- External inputs table
- M-Audio iControl
- Euphonix devices
- CM Labs Motormix
- Frontier Design TranzPort
- JLCooper CS-32 MiniDesk
- JLCooper FaderMaster 4/100
- JLCooper MCS3
- Korg microKONTROL and KONTROL49
- Mackie Baby HUI
- Mackie HUI
- HUI setup
- HUI assignments
- HUI assignments overview
- HUI assign controls
- HUI fader bank buttons
- HUI window controls
- HUI keyboard shortcuts
- HUI channel strips
- HUI DSP controls
- HUI function keys
- HUI global controls
- HUI automation controls
- HUI status/group controls
- HUI editing controls
- HUI time display
- HUI numeric keypad controls
- HUI transport controls
- HUI cursor buttons
- HUI jog wheel
- HUI foot switches
- Mackie C4
- Novation Launchpad
- Radikal Technologies SAC-2K
- Recording Light
- Roland SI-24
- Tascam US-2400
- Yamaha 01V96
- Yamaha 02R96
- Yamaha DM1000
- Yamaha DM2000
- DM2000 Setup
- DM2000 assignments
- DM2000 Assignments overview
- DM2000 Matrix Select controls
- DM2000 Aux Select controls
- DM2000 Encoder and Fader Mode controls
- DM2000 Display Access controls
- DM2000 Effect/Plug-in controls
- DM2000 LCD display
- DM2000 Track Arming controls
- DM2000 Automix controls
- DM2000 Locator controls
- DM2000 Transport and cursor controls
- DM2000 Channel strips
- DM2000 Assignable keys
- Copyright
172Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
SHIFT In Pan view: sets volume to Unity
(0dB).
In Send views: switches the Send
mode (pre/post).
F-KEY Turns the Record Enable button of
each channel on or off.
SOLO buttons Enables or disables Solo.
MUTE buttons Enables or disables Mute. In Send
views with Flip mode enabled:
mutes/unmutes the selected Send.
SHIFT In Send views: mutes/unmutes the
selected Send.
Faders Controls the volume of each channel
(unless Duplicate or Swap Flip mode
is active).
Tascam US-2400 encoders in Logic Pro
In CHAN mode (CHAN button on), the encoders control these parameters on the
selected channel:
Control Assignment
Encoder 1 (AUX 1) Controls Send 1 level.
Encoder 2 (AUX 2) Controls Send 2 level.
Encoder 3 (AUX 3) Controls Send 3 level.
Encoder 4 (AUX 4) Controls Send 4 level.
Encoder 5 (AUX 5) Controls Send 5 level.
Encoder 6 (AUX 6) Controls Send 6 level.
Encoder 7 Controls Send 7 level.
Encoder 8 Controls Send 8 level.
Encoder 11 (GAIN 1) Controls the Gain parameter of band 3, if a Channel or Linear Phase EQ is
inserted.
Encoder 12 (FREQ 1) Controls the Frequency parameter of band 3, if a Channel or Linear Phase
EQ is inserted.
Encoder 13 (Q 1) Controls the Q factor of band 3, if a Channel or Linear Phase is inserted.
Encoder 14 (GAIN 2) Controls the Gain parameter of band 4, if a Channel or Linear Phase is
inserted.
Encoder 15 (FREQ 2) Controls the Frequency parameter of band 4, if a Channel or Linear Phase
is inserted.
Encoder 16 (Q 2) Controls the Q factor of band 4, if a Channel or Linear Phase EQ is
inserted.