Daim Ntawv Qhia Tus Neeg Siv

171Control Surfaces Support Guide for Logic Pro
US-2400 assignments
Overview of Tascam US-2400 assignments in Logic Pro
These sections outline the assignment of TascamUS-2400 interface elements to Logic Pro
functions.
• US-2400 Channel strips
• US-2400 Encoders
• US-2400 Master channel
• US-2400 Assignments overview
• US-2400 Master section controls
Tascam US-2400 channel strips in Logic Pro
The table outlines the channel strip controls and their assignments.
Note:A modifier button, such as SHIFT, below a control description indicates that the
control has an alternate use while the modifier is held down.
Control Modifier Assignment
Encoders CHAN button on: see
US-2400
Encoders
.
CHAN button flashing: encoders
control Instrument parameters. Also
see
Instrument Edit view.
PAN button flashing: encoders
control plug-in parameters. Also see
Plug-in Edit view.
Other modes: encoders control the
parameters of the active mode.
F-KEY
• If you are in Instrument Edit view
(CHAN button flashing), pressing
the F-Key enters the Instrument
Assignment view. The encoders
are used to choose an instrument
plug-in from the list (of available
software instrument plug-ins).
• If you are in Plug-in Edit view
(PAN button flashing), pressing
the F-Key enters the Plug-in
Assignment view. The encoders
are used to choose an effect
plug-in from the list (of available
effect plug-ins).
• If you are in Send view (AUX
button LED flashes) and press the
F-Key, the encoders are used to
assign the send destination.
SEL buttons Selects tracks/channels.