Daim Ntawv Qhia Tus Neeg Siv

165Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
PAN 1 to 12 In Pan Edit mode:
• Controls channel strip Pan/
Balance (surround angle for
channels in surround mode).
In EQ/Send mode:
• 1/3/5/7: Control the Gain
parameter of EQ bands 1–4.
• 2/4/6/8: Control the Frequency
parameter of EQ bands 1–4.
• 9–12: Control Send 1–4 levels.
In Plug-in Edit mode:
• 1–10: Edits plug-in parameter.
• 11: Bypasses the plug-in.
• 12: Shifts plug-in parameter
page. (A page is a collection of
parameters.)
In Instrument mode:
• 1–10: Edits Instrument parameter.
• 11: Bypasses the instrument
plug-in.
• 12: Shifts Instrument parameter
page.
SHIFT In EQ/Send mode:
• 2/4/6/8: Control the Q-Factor of
EQ bands 1–4.
• 9–12: Determine Send 1–4
destinations.
CH SELECT 1 to 12 Selects track/channel.
STATUS 1 to 12 In Automation mode: Switches
Automation mode between:
• Off (LED off)
• Read (green)
• Latch (orange)
• Write (red)
In Record Ready mode: Turns
Record Enable on or off. In Solo
mode: Enables or disables Solo.
In Mute mode: Enables or disables
Mute.
Fader 1 to 12 Controls volume.
Master fader Controls the master channel strip.