Daim Ntawv Qhia Tus Neeg Siv

158Control Surfaces Support Guide for Logic Pro
Control Assignment
9 Num LED off: Pastes the Clipboard contents.
Num LED on: Equivalent to 9 on computer keyboard.
0 Num LED off: Saves the project.
Num LED on: Equivalent to 0 on computer keyboard.
Num Switches the numeric buttons between primary and secondary function
(see above).
Enter Equivalent to Enter key on the computer keyboard.
Note:All buttons that are equivalents of computer keyboard keys are independent of the
computer keys. Either can be reassigned.
Radikal Technologies SAC-2K locator display in Logic Pro
The locator display shows the current playhead position in bars/beats format, as defined in
the project settings. A period separates display segments because the bars/beats format
uses (up to) 14 characters in Logic Pro, and the SAC display is limited to 8 digits.
Radikal Technologies SAC-2K marker controls in Logic Pro
The table outlines the marker controls and their assignments:
Note:A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate use while the modifier is held down.
Control Modifier Assignment
SHIFT Shifts to secondary function of
other buttons.
Scrub Switches between three jog wheel
modes:
• LED off: Moves playhead by one
bar.
• LED on: Activates Scrub mode.
• LED flashes: Activates Shuttle
mode.
From Sets left locator at the current
playhead position.
SHIFT Moves the playhead to the left
locator position.
Store Marker Creates a marker at the current
playhead position.
SHIFT Deletes the marker at the current
playhead position.
To Sets right locator at the current
playhead position.
SHIFT Moves the playhead to the right
locator position.