Daim Ntawv Qhia Tus Neeg Siv

146Control Surfaces Support Guide for Logic Pro
Launchpad Pro function buttons
Use the following buttons on the Launchpad Pro for editing and arrangement in
Session mode.
• Shift: Modifier key, used to switch the function of other buttons.
• Click: Press to turn the metronome on and off.
• Undo:
• Press to undo the previous command.
• Press and hold Shift, then press the Undo button to redo the last Undo command.
• Delete:
• Press to delete selected objects.
• Press and hold, then tap a pad to delete the cell.
• Quantize:
• Press to quantize selected regions, cells, or events.
• Press and hold, then tap a pad to quantize the cell.
• Duplicate:
• Press to repeat selected regions, cells, or events.
• Press and hold, then tap a pad to repeat the cell.
• Double:
• Press to double the length of selected regions, cells or events.
• Press and hold Shift, then press the Double button to halve the length of selected
regions, cells or events.
• Press and hold, then tap a pad to double the length of the cell.
• Press and hold Shift and the Double button, then tap a pad to halve the length of
the cell.
Launchpad Pro mixer buttons
The Launchpad Pro does not have a dedicated Mixer mode but rather several buttons you
can use to directly access individual mixing parameters.
• Volume: Enables Volume mode.
• Pan: Enables Pan mode.
• Sends: Enables Sends mode.
• Record Arm: Enables the Record Arm page.
• Track Select: Enables the Track Select page.
• Mute: Enables the Mute page.
• Solo: Enables the Solo page.
• Stop Clip: Enables the Stop Clip page.