Daim Ntawv Qhia Tus Neeg Siv

136Control Surfaces Support Guide for Logic Pro
Use Instrument Assign Mixer view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2. Press V-Select 22 (labeled Instru Mixer).
In Instrument Assign Mixer view, the C4 displays the Instrument slots of the selected
instrument channels.
• Turn a V-Pot to select an instrument. (This action lets you browse through the software
instruments listed in the Instrument Plug-in menu, shown in Logic Pro instrument
channels.)
• Press the respective V-Select to insert the chosen instrument. This enters Instrument
Edit view, where you can edit instrument parameters.
• The TRACK L and TRACK R buttons shift the fader bank by the number of channel strips
in the control surface group.
• Holding down SHIFT and pressing a V-Select switches the bypass state of the
respective Instrument slot. An asterisk (*) precedes the name of bypassed instruments.
Use Instrument Edit view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2. Press V-Select 22 (labeled Instru Mixer).
3. Insert or select an instrument, which automatically switches the C4 to Instrument Edit
view.
In Instrument Edit View:
• V-Pots 1 to 32 constitute a group of 32 parameters. Splitting is possible (see C4
function buttons
).
• BANK Left/BANK Right shifts the edited parameters by one page.
• In Split mode, the BANK button behaviors apply to Split Upper.
• When holding down SHIFT, the BANK button behaviors apply to Split Lower.
• SINGLE Left/SINGLE Right shifts the edited parameters by 1.
• In Split mode, the SINGLE button behaviors apply to Split Upper.
• When holding down SHIFT, the SINGLE button behaviors apply to Split Lower.