Daim Ntawv Qhia Tus Neeg Siv

135Control Surfaces Support Guide for Logic Pro
Use Effect Assign Mixer view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2. Press V-Select 21 (labeled PlugIn Mixer).
In Effect Assign Mixer view, the C4 displays the first four Insert slots of the eight
selected channels.
• Turn a V-Pot to switch between effects. (This action lets you browse through the effects
listed in the Effect menu, shown in Logic Pro mixer channels.)
• Press the respective V-Select to insert the chosen effect. This activates Effect Edit
view, where you can directly edit effect parameters.
• The SLOT UP/SLOT DOWN buttons switch between Insert slots.
• TRACK L and TRACK R shift the fader bank by the number of channel strips in the
control surface group.
• Holding down SHIFT and pressing a V-Select switches the bypass state of the
respective Insert slot. Bypassed effects are denoted by an asterisk (*) that precedes
the effect name.
Use Effect Edit view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2. Press V-Select 21 (labeled PlugIn Mixer).
3. Insert or select an effect. The C4 automatically switches to Effect Edit view.
In Effect Edit view:
• V-Pots 1 to 32 constitute a group of 32 parameters. Splitting is possible (see C4
function buttons
).
• The SLOT UP/SLOT DOWN buttons select the Insert slot.
• BANK Left/BANK Right shifts the edited parameters by one page.
• In Split mode, the SLOT and BANK button behaviors apply to Split Upper.
• When holding down SHIFT, the SLOT and BANK button behaviors apply to Split
Lower.
• SINGLE Left/SINGLE Right shifts the edited parameters by 1.
• In Split mode, the SINGLE button behaviors apply to Split Upper.
• When holding down SHIFT, the SINGLE button behaviors apply to Split Lower.